Stocked Items
Roof Products & Systems
Pipe Portal System
A
versatile, leak-proof, and weathertight
solution to routing pipes through the
roof. The RPS Pipe Portal® System is
designed to allow for both vertical and
horizontal pipe movement, yet provide a
maintenance-free permanent installation
which accommodates pipe sizes of 3/8" up
to 12". The curb cover is molded of
durable ABS plastic (Acrylonitrile
Butadiene Styrene) with a laminated
acrylic coating, which gives high
resistance to both ozone and ultraviolet
sun rays, as well as a serviceable
temperature range of -40°F to +160°F.
The molded sealing ring on the collared
opening and the corresponding groove in
the rubber cap assures a weathertight
pressure and mechanical lock. The
protective rubber caps are compression
molded of EPDM rubber with a serviceable
temperature range of -60°F to +250°F and
also have high resistance to both ozone
and ultraviolet sun rays. The
conically-shaped steps of the nipple
provide a taut waterproof seal around
the pipe and the stainless steel
snaplock swivel clamp(s) provided give
added protection to guarantee the pipe
seal. The swivel action of the clamp
cuts installation time by 75%.
Alumi-Flash
The RPS Alumi-Flash works with all roof systems and makes pitch pans obsolete. Due to the flexibility of the EPDM rubber caps, roof leaks are eliminated because penetrations are allowed to expand, contract, and vibrate independently of the vapor barrier. There are 5 caps available which accommodate a variety of pipes, tubes, and angle irons from 3/8" through 12". The caps are molded EPDM rubber. EPDM is a hydrocarbon rubber which is compounded to resist degradation due to oxidation or exposure to ozone and ultraviolet rays, while having a serviceable temperature range of -60°F to +270°F. The caps are mechanically sealed to the Alumi-Flash base with a double "Weather Tite Pressure Seal", which consists of two (2) beads formed into the collar that mate with the double grooves on the inside of the caps. The base must be roofed in, using good roofing practices. Together, the cap and base provide a permanent, watertight, and maintenance-free means for penetrating roofs that is simple and easy to install.
Air-Tite Connectors
ATM (No Damper) - ATMD (With
Damper)
Available Sizes
4, 5, 6, 7, 8, 9, 10, 12,
14, 16 |
Bellmouth Fitting
BM (No Damper) - BMD (With
Damper)
Available Sizes
5, 6, 7, 8, 9, 10, 12, 14 |
Take-Off
Model 3300 (No Damper)
Available Sizes
4,
5, 6, 7, 8, 9, 10, 12, 14,
16 |
Back to Top of Page
|
 |
|
We are
active members of the Sheet Metal Contractors
Association of Philadelphia (SMCA)
and the
American Society of Heating, Refrigerating
and Air-Conditioning Engineers (ASHRAE) |
|
